As Zensai brings its products closer together, the Microsoft 365 connections for all Zensai products are moving to a single Zensai application registration. If your tenant installed Learn365 before the June 8, 2026 Learn365 release (version 3.74), you’ll need to move the existing Microsoft Entra ID (identity) and SharePoint (training content) connections from the legacy Learn365 app registration to the new Zensai one.
Microsoft requires a Microsoft 365 global admin to grant consent separately for each app registration. A global admin must therefore approve the updated connections by completing the four steps in the banner displayed in the Learn365 Admin Center.
During the migration, only the consent and connections change. Your Learn365 configuration, content, enrollments, and user data aren't affected.
Overview
Tenants that installed Learn365 before the June 8, 2026 Learn365 release (version 3.74).
Who can complete the migration
A Microsoft 365 global admin.
Where to complete the migration
By walking through the steps in the banner displayed in the Learn365 Admin Center.
How many steps
Four, completed in order.
How long it takes
Usually, a few minutes.
Impact on data
None. Configuration, content, enrollments, and user data aren't affected.
Impact on users
Learners and admins who are signed in during the migration may be asked to refresh the page or sign in again.
Run the migration once, from any environment. It applies to all environments within a single tenant.
What is the deadline
March 1, 2027
Why this change is happening
There were multiple reasons for this change, including:
-
One Zensai identity in Microsoft 365.
Learn365 now uses the same app registration model as the rest of the Zensai product family. This is the basis for the unified Zensai experience.
-
Separate, purpose-specific permissions.
The single legacy Learn365 app is replaced by Zensai apps that each have a narrower scope: Zensai (core app), Zensai User Management (Microsoft Entra ID integration), and Zensai SharePoint Integration (SharePoint). You can review and audit each one separately in Microsoft Entra ID.
-
Microsoft's consent model requires it.
Admin consent applies to one app registration only. Consent you gave to the legacy Learn365 app can't be carried over to the Zensai apps, so a Microsoft 365 global admin must grant it again.
Who is affected
The migration affects tenants that installed Learn365 before the June 8, 2026 Learn365 release (version 3.74). If you installed Learn365 later, you already use the Zensai app registration and won’t need the migration.
If your tenant is affected, the Action needed: reconnect Microsoft 365 integrations notification banner appears in the Learn365 Admin Center starting from November 23, 2026, which is the day of the Learn365 release (version 3.80).
Microsoft 365 global admins see a banner with clickable links to start each migration step.
Admins without global rights see a banner asking them to contact a global admin to complete the migration.
If you close the banner, it won’t reappear until your next browser session.
Before you start
Before starting the migration, keep in mind the following requirements:
-
Make sure a Microsoft 365 global admin runs the migration.
Every migration step asks for tenant-wide admin consent. Admins with only Learn365 admin rights won’t be able to complete the migration.
-
Run the migration during off-peak hours.
Learners who are actively using Learn365 during the migration may see a prompt to refresh their page. To minimize disruption, start the migration when user activity is low, for example, outside of business hours.
-
Don't create new catalogs during the migration.
Wait until the migration is fully complete before adding new catalogs.
-
Check that Learn365 can reach your SharePoint sites.
During the third migration step, the Zensai SharePoint Integration app gets access to every existing course catalog site and course site. If a site was deleted, moved, or had Learn365's access removed, the step stops and lists that site. Before you start, check such sites. If you find one, restore access or remove the site from the Learn365 configuration.
-
Check the SharePoint permissions of the user who runs the migration.
To migrate course catalog SharePoint sites, the user who runs the migration must have access to these sites. They should be added to the sites as members (admins or visitors).
-
Check for custom app permission changes.
If your organization has previously modified the app permissions in Microsoft Entra ID (for example, by removing specific permissions), you'll need to re-apply those customizations to the new Zensai apps after the migration is complete.
If you revoked the Sites.FullControl.All permission from the Learn365 enterprise application in Microsoft Entra ID, restore and grant the permission before running the migration. It’s required for migrating course catalog SharePoint sites.
-
Check your consent and Conditional Access policies.
If your organization restricts admin consent, uses an admin consent workflow, or has Conditional Access policies scoped to specific apps, make sure a global admin can grant consent to the Zensai apps. Add the Zensai apps to any policies that include the Learn365 app.
-
Allow pop-ups for Learn365.
Each consent step opens a Microsoft sign-in pop-up. A browser pop-up blocker can stop it from opening.
Complete the migration
The migration banner in the Learn365 Admin Center guides you through four steps you’ll need to complete in order. The banner is displayed to Microsoft 365 global admins from November 23, 2026, which is the day of the Learn365 release (version 3.80).
Selecting each step in the banner opens a pop-up prompting you to grant consent before proceeding to the next step. A completed step is marked with a check mark, and you can then move on to the next step.
The steps are:
1. Grant consent for Zensai app permissions.
In the pop-up that appears after selecting the first step in the banner, grant admin consent for the Zensai app permissions.
2. Connect Microsoft Entra ID.
Select the second step in the banner and follow the prompts in the pop-up to grant consent and complete the Microsoft Entra ID connection. User and group synchronization is then handled by the Zensai User Management app.
3. Connect SharePoint.
Select the third step in the banner and follow the prompts in the pop-up to grant consent and connect to your existing SharePoint sites. Learn365 then:
- deploys any prerequisites the Zensai SharePoint Integration app needs,
- grants the Zensai SharePoint Integration app access to each existing course catalog site and course site,
- checks that the app can reach every site.
This step can take longer if you have many catalogs and courses. Keep the page open until the step is marked complete.
If Learn365 can’t grant access to one or more sites, the step is marked with a warning, and the banner displays the following message: "One or more SharePoint sites couldn't be migrated. The following site may have been deleted, or Learn365 may no longer have access to it.".
To resolve the issue:
1. Check the site listed in the banner.
2. Do one of the following:
- Restore access. If the site still exists, make sure it's available and that Learn365 still has access to it.
- Remove it from Learn365. If the site was deleted on purpose, remove the related catalog or course from the Learn365 configuration.
3. Select Try again.
If the problem still occurs, contact Zensai Product Support.
4. Complete the migration.
Select the last step in the banner. Learn365 removes the legacy connection and switches your tenant to the Zensai app registration. Your current session was issued under the legacy Learn365 app registration, so you're asked to sign in again. After you sign in, the migration picks up where it left off and finishes.
NOTE
- Migration progress is saved automatically. If you close the banner or navigate away, completed steps are preserved. You can pick up where you left off in the next browser session.
- The legacy connection is removed only after all previous steps succeed and SharePoint access is confirmed. Until then, Learn365 keeps working through the legacy app registration.
Changes in Microsoft Entra ID
The migration leads to the following changes in Microsoft Entra admin center > Enterprise applications:
-
New Zensai applications that hold the permissions Learn365 now uses:
Enterprise application Purpose Added in step Zensai Core app: sign-in and basic Learn365 functionality. 1. Grant consent for Zensai app permissions Zensai User Management Microsoft Entra ID integration: user and group synchronization 2. Connect Microsoft Entra ID Zensai SharePoint Integration Access to the SharePoint sites Learn365 uses for training content 3. Connect SharePoint -
The legacy Learn365 application stays.
Keep it as it is, because the app is still needed to support the Learn365 app in Microsoft Teams.
Multi-environment tenants
If your tenant uses multiple environments, you only need to run the migration once. Completing it from any environment applies the migration to all environments.
After the migration
Once all steps are complete, you are prompted to sign in again. Other users who are signed in to Learn365 at that time, including learners, may see a prompt to refresh the page. If they do, they should refresh and sign in again.
Reconnect your Microsoft 365 (Exchange) accounts in the Microsoft 365 Connection Settings in Learn365, specifically the accounts showing a consent warning. This way, notification emails and calendar features will continue working reliably. For more information about how to connect an account at the global and catalog levels, see this article.
NOTE
When you reconnect a catalog Microsoft 365 (Exchange) account, Learn365 automatically restores the calendar subscription it uses to track learners' responses to session invitations in Outlook.
FAQ
Will we lose any data, courses, or settings?
No. Only the Microsoft 365 consent and connections change. All Learn365 configuration, content, and user data stay as they are.
Do learners need to do anything?
No. Learners who are using Learn365 during the migration may be asked to refresh the page or sign in again.
Can a Learn365 admin complete the migration?
Only if they are also a Microsoft 365 global admin. Admins without global admin rights see a banner that asks them to contact a Microsoft 365 global admin.
Does the Microsoft 365 global admin need to be an admin in every catalog?
No. The migration covers all catalogs in the tenant, regardless of who created them.
A SharePoint site couldn't be migrated. What should we do?
See the possible solutions in step 3 of the Complete the migration section.
Email notifications or calendar responses stopped working after the migration.
Reconnect the affected Microsoft 365 account in the Microsoft 365 Connection Settings, globally or for the catalog. See the After the migration section.